seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fixing frame with gear lever boot, installing > < Fixing frame with gear lever boot: Removing and installing

Leon Mk2

Fixing frame with gear lever boot, removal
Fixing frame with gear lever boot, removal
  Note
t  There are two types of fixing frames with gear lever boot:
t  Fixing frames with gear lever boot to week ► 22.2008 with three fixing clamps → Fig.
t  Fixing frames with gear lever boot to week 22.2008 ► with two fixing clamps → Fig.
   
Vehicles up to week ► 22.2008
–  Release the attachment frame -1-, by pressing the fixing clips in the direction of the -arrows-, using the lever -U 30800- and lift the frame upwards from the rear.
  E68-10009
Vehicles from week 22.2008 ►
–  Release the attachment frame -1-, by pressing the fixing clips in the direction of the -arrows-, using the lever -U 30800- and lift the frame upwards from the rear.
  E68-10075
Continued for all vehicles
–  Lift the frame upwards and remove it from the grooves at the front.
  E68-10012
–  Break the fastening clip -1-.
–  Remove the dustguard with the knob and the attachment frame turning in the direction of the -arrow-.
  E68-10006
Vehicles with automatic gearbox
–  Remove mounting frame with lever -U 30800-.
–  Lift the frame upwards and remove it from the grooves at the front.
–  Break the fastening clip -2-.
–  Disconnect connector -1-.
–  Remove the dustguard with the knob and the attachment frame turning in the direction of the -arrow-.
  E68-10040

Fixing frame with gear lever boot, installing > < Fixing frame with gear lever boot: Removing and installing