seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Passenger protection > < Brackets on the front sill panel trim: Removing and installing

Leon Mk2

Brackets on the rear sill panel trim: Removing and installing
Brackets on the rear sill panel trim: Removing and installing
  Note
Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.
removing
–  Remove the connecting piece between sill panel strip and luggage compartment trim → Chapter.
–  Remove sill panel moulding → Chapter.
   
–  Unscrew bolts -1-, -3-, -4- and -5-.
–  Push the bracket of the front sill panel trim -2- towards the middle of the vehicle and remove.
Installation
  N68-10531
–  Centre the brackets of the front sill panel trim -2- on the rear end on the bodywork and push to the end in the direction of the lower sill.
–  Screw the brackets of the sill panel trim onto the bottom sill in the following order: -4-, -1-, -3- and -5-.
Tightening torque: 2 Nm
  N68-10531

Passenger protection > < Brackets on the front sill panel trim: Removing and installing