seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Heel mouldings > < Removing and installing mounting of front sill panel strip

Leon Mk2

Removing and installing mounting of rear sill panel strip
Removing and installing mounting of rear sill panel strip
  Note
Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.
Removing
–  Remove connecting piece between sill panel strip and luggage compartment trim → Chapter.
–  Remove sill strip → Chapter.
   
–  Undo bolts -1-, -3-, -4- and -5-.
–  Push mounting of sill panel strip -2- in front area in direction of middle of vehicle and remove.
Installing
  N68-10531
–  Centre the mounting of sill panel strip -2- at rear end in relation to body and push in direction of side sill as far as the stop.
–  Bolt the mounting of sill panel strip to side sill in the bolting sequence -4-, -1-, -3- and -5-.
Specified torque: 2 Nm.
  N68-10531

Heel mouldings > < Removing and installing mounting of front sill panel strip