| Checking airbag mounting components following an accident |
| Always replace any damaged mounting parts. Never attempt to bend back into shape or bend to fit. |
| The following components must be checked after an airbag has been triggered. |
| If passenger's airbag has been triggered: |
| t
| Central tube for dash panel; it must be possible to install passenger's airbag supports and passenger's airbag unit so that they are free of stress. Otherwise central tube should also be renewed. |
| t
| Check the glove box for damage. Renew glove box if it is damaged. |
| If driver's airbag has been triggered: |
| t
| Steering wheel: Remove the steering wheel and place it on a level surface (resting on rim). The full area of the rim must lie flat. If it does not, the steering wheel has to be renewed. |
| t
| Check the steering wheel for smoke marks. Renew steering wheel if such marks are found. |
|
|
|
