seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear seat belt, assembly > < Rear seat belt automatic mechanism, general installation overview
Rear seat belt, removing
Rear seat belt, removing
The following steps for removal and installation apply for the rear seatbelt on the left side. The procedure for the right rear seatbelt is analogue.
   
–  Fold down the rear seat back.
–  Remove bolt -4- from the support fitting -3-.
–  Remove the bracket from the rear tray → Chapter.
–  Partially detach the side lining in the boot → Chapter.
–  Loosen the bolt -1- with the wrench -T20042-.
–  Disconnect rear belt mechanism -2- and remove rear seatbelt.

   

Rear seat belt, assembly > < Rear seat belt automatic mechanism, general installation overview