WARNING | Before working on the electrical system, disconnect the battery earth strap. |
| When working on seats fitted with side airbags, observe the safety requirements → Chapter. |
| Before removing (touching) the airbag unit, it is necessary for the mechanic to discharge his body electrostatically. This can be accomplished by touching any earthed metal parts /e.g. water pipe, heating pipe or metal supports). |
|
Note | t
| When removal and installation the seats use gloves to avoid soiling the upholstery. |
| t
| The removal and installation procedures may need to be modified slightly depending on the equipment variants. |
| t
| When the battery is reconnected, check the vehicle equipment (radio, clock, window risers), following the indications in the Workshop Manual and/or the Operating Instructions. |
|
|
|
