Leon Mk2
Rear seats: Assembly overview |
Rear seat backrest: Assembly overview |
1 - | Bolt |
q | 1 + 1 each |
q | 5 ±1 Nm |
2 - | Rear seat backrest catch cover 2/3, right-side . |
q | removing and installing → Chapter |
3 - | Bolt |
q | 1 + 1 each |
q | 1.8 ±0.5 Nm |
4 - | Head restraint cover |
q | removing and installing → Chapter |
5 - | Guide of the side head restraint |
q | removing and installing → Chapter |
6 - | Head restraint, outer side |
q | removing and installing → Chapter |
7 - | Guide of the side head restraint with button |
q | removing and installing → Chapter |
8 - | Head restraint cover |
q | removing and installing → Chapter |
9 - | Guide of the middle head restraint |
q | removing and installing → Chapter |
10 - | Head restraint (centre) |
q | removing and installing → Chapter |
11 - | Guide of the middle head restraint with button |
q | removing and installing → Chapter |
12 - | Top Tether retaining bracket |
q | only for model Exeo ST |
13 - | Guide, right side |
q | Assembly overview → Anchor |
q | For partition grille |
q | Depending on equipment version |
14 - | Guide, left side |
q | Assembly overview → Anchor |
q | For partition grille |
q | Depending on equipment version |
15 - | Bolt |
q | 2 + 2 each |
q | 9 ±1 Nm |
16 - | Load-through hatch (for ski bag) |
q | removing and installing → Chapter |
17 - | Head restraint cover |
q | removing and installing → Chapter |
18 - | Rear seat backrest head restraint 1/3, left-side . |
q | removing and installing → Chapter |
19 - | Rear seat backrest head restraint guide 1/3, left-side . |
q | removing and installing → Chapter |
20 - | Top Tether retaining bracket (left-side) |
q | only for model Exeo ST |
21 - | Cover |
q | only for model Exeo ST |
22 - | Bolt |
q | only for model Exeo ST |
q | 1 off |
q | 9 ±1 Nm |
23 - | Plate |
q | only for model Exeo ST |
q | 1 off |
24 - | Rear seat backrest head restraint guide 1/3, left-side with button. |
q | removing and installing → Chapter |
25 - | Rear seat backrest catch cover 1/3, left-side. |
q | removing and installing → Chapter |
26 - | Backrest lock of rear seat backrest 1/3, left-side |
q | removing and installing → Chapter |
27 - | Bolt |
q | 2 + 2 each |
q | 25 ±2 Nm |
28 - | Nut |
q | 2 + 2 each |
29 - | Frame of the rear seat backrest 1/3, left-side |
q | Removing and installing the rear seat backrest 1/3, left-side → Chapter |
30 - | Outer fitting of the rear seat backrest |
q | removing and installing → Chapter |
31 - | Bolt |
q | 2 + 2 each |
q | 17.5 ±1 Nm |
32 - | thrust piece |
q | 1 + 1 each |
33 - | Striker pins |
q | 1 + 1 each |
34 - | Conical hexagon bolt |
q | 1 + 1 each |
q | 55 Nm |
35 - | Washer |
q | 1 + 1 each |
36 - | Dished washer |
q | 1 + 1 each |
37 - | Side padding, left side |
q | Removing and installing rear seat side padding without airbag → Chapter |
q | Removing and installing rear seat side padding with airbag → Chapter |
38 - | Bolt |
q | 1 + 1 each |
q | 9 Nm |
39 - | Padding for 1/3 seat backrest, left side |
q | Removing and installing the rear seat backrest 1/3, left-side → Chapter |
q | Removing and installing the cover of the rear seat backrest 1/3, left-side → Chapter |
40 - | Cover of the rear seat backrest 1/3, left-side |
q | removing and installing → Chapter |
41 - | Centre mount for partitioned backrest |
q | removing and installing → Chapter |
42 - | Bolt |
q | 4x |
q | 17.5 Nm |
43 - | Cable clip |
44 - | Bolt |
q | 1 off |
q | 9 Nm |
45 - | Panel |
46 - | Panel |
47 - | Bolt |
q | 2 off |
q | 3 ±0.4 Nm |
48 - | Bolt |
q | 1 off |
q | 1.8 ±0.5 Nm |
49 - | Panel |
50 - | Bolt |
q | 1 off |
q | 3 ±0.4 Nm |
51 - | Catch lever |
52 - | Bolt |
q | 1 off |
q | 3 ±0.4 Nm |
53 - | Nut |
q | 2 off |
54 - | Nut |
q | 2 off |
55 - | Padding |
56 - | Cover of the rear seat backrest 2/3, right-side |
q | Removing and installing the cover of the rear seat backrest 2/3, right-side → Chapter |
57 - | Centre armrest with cup holder |
q | removing and installing → Chapter |
58 - | Cup holder |
q | removing and installing → Chapter |
59 - | Cover for the cup holder |
q | Removing and installing cup holder → Chapter |
60 - | Centre armrest |
q | removing and installing → Chapter |
61 - | Padding for 2/3 seat backrest, right side |
q | Removing and installing right 2/3 section of rear seat backrest → Chapter |
q | Removing and installing the cover of the rear seat backrest 2/3, right-side → Chapter |
62 - | Cover of the rear seat backrest 2/3, right-side |
q | removing and installing → Chapter |
63 - | Guide for the three-point seat belt (rear centre) |
64 - | Side padding, right side |
q | Removing and installing rear seat side padding without airbag → Chapter |
q | Removing and installing rear seat side padding with airbag → Chapter |
65 - | Frame for vehicles with load-through hatch |
q | removing and installing → Chapter |
66 - | Frame for the rear seat backrest 2/3, right-side |
q | Removing and installing right 2/3 section of rear seat backrest → Chapter |
67 - | Backrest lock for the rear seat backrest 2/3, right-side |
q | removing and installing → Chapter |
Rear seat bench: Assembly overview |
1 - | Rear bench seat cover |
q | removing and installing → Chapter |
2 - | Rear bench seat padding |
q | Removing and installing rear seat bench → Chapter |
q | removing and installing → Chapter |
3 - | ISOFIX retainers, left-side |
q | removing and installing → Chapter |
4 - | Bolt |
q | 2 + 2 each |
q | 30 ±3 Nm |
5 - | Rear bench seat frame |
q | removing and installing → Chapter |
6 - | Grommet |
q | 2 off |
7 - | ISOFIX retainer, right side |
q | removing and installing → Chapter |