seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rear door trim: Removing and installing > < Overview of fitting locations

Leon Mk2

Rear door trim: Assembly overview
   
Rear door trim: Assembly overview
1 - Door trim
q   Removing and installing → Chapter
2 - Bolts (3 each)
3 - Trim panel
4 - Bolt
5 - Window regulator switch
6 - Snaplock nut (6x)

   
Disengaging Bowden cable
–  Detach circlip -3-.
–  Pull Bowden cable -1- out of guide -2- and disengage.
  Note
When installing, make sure hook -3- is facing upwards.
  A70-0764
Connector at window regulator control unit
–  Press retaining tab -2- and unplug connector -3- from control unit in direction of arrow.
–  Unplug connector to bass loudspeaker.
  A70-0796
Door trip fastener clip
–  Press retaining tab -2- and pull out clip -1- in -direction of arrow-.
  A70-0646

Rear door trim: Removing and installing > < Overview of fitting locations