seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear door trim: Install > < Rear door trim: Removing and installing
Rear door trim: removing
   
Rear door trim: removing
–  Unclip trim panel -2-.
–  Pull off trim panel -2- to front.
–  Unscrew screw -3- (3x) of the door trim -1-.
–  Removing and installing window regulator switch → Chapter
–  Unclip door trim -1-. Renew damaged clips → Fig.
–  Lift the door trim -1- about 20 cm from the door shell.
–  Disengage Bowden cable for interior door handle → Fig..
–  Connect connectors → Fig..
–  Detach rear door trim.

   

Rear door trim: Install > < Rear door trim: Removing and installing