seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rear cross panel trim: Install > < Removing and installing rear cross panel trim

Leon Mk2

Rear cross panel trim: removing
Rear cross panel trim: removing
–  Open the tailgate.
–  Take out luggage compartment floor covering → Chapter.
–  Partially loosen seal from tailgate → Bodywork, exterior fitting work; Rep. gr.55.
   
–  Unscrew 4 screws -2-5- of the luggage compartment end lining -1- behind the spare wheel.
–  Unhinge luggage compartment lining -1- with the lever -80 200--Arrows- vertically upwards.
  Note
t  If there are still trim clips in the body mounting points, they must be removed and inserted in the trim when installing.
t  Check clips for damage or deformation and renew if necessary.
  A70-10962

Rear cross panel trim: Install > < Removing and installing rear cross panel trim