seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing the lower A-pillar trim > < Lower C-pillar trim, removing and installing

Leon Mk2

Remove the lower A-pillar trim
Remove the lower A-pillar trim
   
–  Remove the release lever -4- of the bonnet (only on driver's side) → Bodywork, exterior installation work; Rep. gr.55.
–  Detach clips -3- from the upper portion of the lining -1- using the lever -T20043-.
–  Remove lining -1-
  Note
Insert a protective device between the surface where the trim should be lent against and its contact surface to prevent the possibility of dirt entering.
  E70-0148

Installing the lower A-pillar trim > < Lower C-pillar trim, removing and installing