seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Upper C-pillar trim (without airbag): attach > < Upper C-pillar trim (without airbag), assembly overview
Upper C-pillar trim (without airbag): Take off
   
Upper C-pillar trim (without airbag): Take off
–  Remove the rear seats → Chapter, → Chapter.
–  Remove the rear tray.
–  Remove the bracket from the rear tray → Chapter.
–  Remove the upper lining of strut C → Chapter.
–  Unscrew the bolt -2-.
–  Remove the trim -1- from the fixing clips -3-using the lever -T20043- and remove the trim.
  Note
Insert a protective device between the surface where the trim should be lent against and its contact surface to prevent the possibility of dirt entering.

   

Upper C-pillar trim (without airbag): attach > < Upper C-pillar trim (without airbag), assembly overview