Leon Mk2
| Transverse support: general installation diagram |
Note| Always replace self locking nuts and bolts. |
| 1 - | Transverse support |
| q | Removing and fitting → Chapter |
| 2 - | Rigidity strip |
| q | Removing and fitting → Chapter |
| 3 - | Hexagonal bolt |
| q | 23 ± 2 Nm |
| q | 5 units |
| 4 - | Central bracket in Z |
| 5 - | Clip Bolt |
| q | 2 units |
| 6 - | Hexagonal bolt |
| q | 4 ± 0.6 Nm |
| q | 2 units |
| 7 - | Torx screw |
| q | 1,4 ± 0.2 Nm |
| q | 2 units |
| 8 - | Clip Bolt |
| q | 13 units |
| 9 - | Torx screw |
| q | 4 ± 0.6 Nm |
| q | 3 units |
| 10 - | Hexagonal bolt |
| q | 20 ± 3 Nm |
| 11 - | Front passenger side bracket |
| 12 - | Hexagonal bolt |
| q | 4 ± 0.6 Nm |
| q | 2 units |
| 13 - | Right airbag support |
| 14 - | Glove compartment support |
| 15 - | Torx screw |
| q | 4 ± 0.6 Nm |
| q | 2 units |
| 16 - | Left airbag support |
| 17 - | Hexagonal bolt |
| q | 4 ± 0.6 Nm |
| q | 6 units |
| 18 - | Upper front passenger side central support |
| 19 - | Upper right central support |
| 20 - | Hexagonal bolt |
| q | 20 ± 3 Nm |
| q | 1 unit |
| 21 - | Lower front passenger side support |
| 22 - | Bar support |
| 23 - | Lower driver side support |
| 24 - | Hexagonal bolt |
| q | 20 ± 3 Nm |
| q | 1 unit |
| 25 - | Hexagonal bolt |
| q | 10 ± 1.5 Nm |
| q | 2 units |
| 26 - | Driver side central support |
| 27 - | Hexagonal bolt |
| q | 12 ± 0.5 Nm |
| q | 2 units |
| 28 - | Bolt |
| q | 1 unit |
| 29 - | Driver´s side lateral bracket |
| 30 - | Support |
| 31 - | Torx screw |
| q | 3,5 ± 0.5 Nm |
| q | 2 units |
| 32 - | Hexagonal bolt |
| q | 12 ± 0.5 Nm |
| q | 2 units |
| 33 - | Driver´s side lateral bracket |
| 34 - | Hexagonal bolt |
| q | 20 ± 3 Nm |
| q | 2 units |
| 35 - | Hexagonal bolt |
| q | 4 ± 0.6 Nm |
| q | 3 units |
| 36 - | Steering column support unit |
| q | Removing and fitting → Chapter |
