seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing actuator for front/rear door|Installation > < Removing and installing actuator for front/rear door
Removal
Removal
   
Remove front door trim and door insulation foil: → General body repairs, interior; Rep. gr.70.
–  Remove door lock: → Chapter or → Chapter.
–  Where fitted, unhook handle paddle guide sleeve -1- from locking lugs of carrier -2--arrows- and remove from door lock cover.
  N57-0333
–  Lever cover apart at fasteners -1-.
–  Carefully open cover in -direction of arrow- and remove (note central locking switch).
  N57-0332
–  Remove cross-head screws -1 and 2-.
–  Remove control motor from door lock in -direction of arrow-.
  N57-0112

Removing and installing actuator for front/rear door|Installation > < Removing and installing actuator for front/rear door