| –
| Place the battery -4- in the sender unit with the positive terminal upwards (positive terminal position is marked in housing). |
| –
| Now place the contact plate -3- on the battery -4-. |
| –
| Place battery -2- onto the contact plate with the positive terminal upwards and engage both. |
| –
| Place sender unit -1- and sender unit -5- together and clip together. |
| –
| Then clip transmitter unit to the key. |
Note | When changing the batteries takes longer than 30 seconds, there is a requirement to adapt (synchronize) the key(s): → Chapter Performing functional check. |
|
|
|
