SEAT Workshop Service and Repair Manuals > Leon Mk2 > Body | General body repairs, exterior | Glazing/window mechanism | Door windows | Removing and installing front window regulator

Removal

–	If necessary, remove window crank → Chapter.

Remove front door trim and door insulation foil: → General body repairs, interior; Rep. gr.70.

–	Lower door window and unscrew it.

–	Slide door window upward and secure (e.g. with adhesive tape).

–	Loosen cable tie for window regulator.

–	Remove bolts -1-, specified torque: 8 Nm.

–	With vehicles with electric windows, disconnect connector from window motor.

–	Lift window regulator until retaining lug unclips, take out window regulator from below.

SEAT Workshop Service and Repair Manuals