Leon Mk2
| Automatic rear seat belt mechanism: removal and installation |
| 1 - | Automatic seat belt mechanism |
| 2 - | Support fitting |
| 3 - | Hexagonal bolt |
| q | 40 Nm |
| 4 - | Casing |
| q | Removal: release the lugs and remove the cover |
| 5 - | Hexagonal bolt |
| q | 40 Nm |
| 6 - | Seat back securing support |
| 7 - | Hexagonal bolt |
| q | 20 Nm |
| 8 - | Anchor point for the automatic seat belt mechanism |
| q | The securing lugs determine the position of the automatic seat belt mechanism |
| 9 - | Rear fitting |
| 10 - | Washer |
| 11 - | Hexagonal bolt |
| q | 40 Nm |
| Removal |
| – | Remove support cover C → Chapter |
| – | Remove support → Item by removing the hexagonal bolts → Item |
| – | Remove bolt → Item from the support fitting → Item and the bolt → Item from the rear fitting → Item |
| – | Remove bolt → Item and remove the automatic safety belt mechanism |
|
