Visual check of the belt catch functioning |
Checking safety belt closing: |
–
| Push tab into catch until it is heard to lock. Pull the belt hard to check that it is effectively locked. |
l
| If in a minimum of five checks, the tab were released even once, the whole safety belt must be replaced with catch. |
Checking release of catch: |
–
| Release the safety belt by pressing the key with one finger. |
l
| With the belt untensioned, the tab should be expelled from the catch. |
l
| Do a minimum of 5 checks. If in a minimum of five checks, the tab were not released even once, the whole safety belt must be replaced with catch. |
Caution No lubricants must be used to eliminate noise or stiffness in the belt catch release button under any circumstances. |
|
|
|
|