Leon Mk2
1 - | Seal |
q | Ensure seal is seated correctly after installing trim |
2 - | Clip |
q | Qty. 4 |
q | Destroyed during removal |
3 - | Trim panel |
q | Removing: |
– | Disengage locking lugs → Item and unclip cap → Item and remove upwards or unclip cap → Item and fold upwards |
– | Unscrew belt guide fitting → Item or → Item |
– | Starting from bottom, carefully lever off trim from D-pillar using removal lever -80 - 200- |
q | Installing: |
– | Lever clips → Item out of mounting holes of D-pillar, replace with new ones and insert in trim mountings |
– | Further installation is performed in the reverse order of removal |
4 - | Locking lug |
5 - | Cover |
q | Old version |
6 - | Hexagon bolt |
q | 40 Nm |
7 - | Seat belt with belt anchor |
q | Old version |
8 - | Hexagon bolt |
q | 40 Nm |
9 - | Cover |
q | New version |
10 - | Seat belt with belt anchor |
q | New version |
|
1 - | Clip |
q | Qty. 2 |
q | Destroyed during removal |
2 - | Cover |
q | Lever out |
3 - | Cross-head screw |
4 - | Trim panel |
q | Removing: |
– | Lever out covers → Item and remove cross-head screws → Item |
– | Disengage locking lugs → Item and unclip cap → Item and remove upwards or unclip cap → Item and fold upwards |
– | Unscrew belt guide fitting → Item or → Item |
– | Starting from bottom, carefully lever off trim from D-pillar using removal lever -80 - 200- |
q | Installing: |
– | Lever clips → Item out of mounting holes of D-pillar, replace with new ones and insert in trim mountings |
– | Further installation is performed in the reverse order of removal |
5 - | Belt relay |
q | Old version |
6 - | Hexagon bolt |
q | 40 Nm |
7 - | Cover |
q | Old version |
8 - | Locking lug |
9 - | Seat belt with belt anchor |
q | New version |
10 - | Cover |
q | New version |
11 - | Hexagon bolt |
q | 40 Nm |
12 - | Seal |
q | Ensure seal is seated correctly after installing trim |