Leon Mk2
| Rear bonnet lock: removing and installing |
| 1 - | Bolt |
| 2 - | Joining rod |
| q | Component of rear bonnet activator |
| 3 - | Washer |
| 4 - | Lock key |
| q | Removing: |
| – | Extract the bolts from the handle moulding. |
| – | Remove rear bonnet lining → Linings of rear bonnet ; Rep. Gr.70. |
| – | Remove the actioning rod → Item and the joining rod of the actioning element of the lock key. |
| – | Press the lugs of the inside of the bonnet → Item and extract the lock key from the bonnet, pushing it out. |
| 5 - | Actioning rod |
| 6 - | Closing |
| 7 - | Bolt |
| q | Tightening torque 20 Nm |
| 8 - | Closing plate |
| 9 - | Bolt |
| q | Tightening torque: 20 Nm |
| 10 - | Tailgate operator |
