Leon Mk2
| Door: removing and installing |
| Removing |
| – | Remove the lower lining of strut A -5- |
| – | Release the connectors -6- of strut A. |
| – | Remove the bellows -3- from strut A. Extract the electrical wiring from the strut through the hole. |
| – | Remove bolt -4- from door retainer. |
| – | Separate the hood -2- and unscrew the prisoner bolt -1- from the upper and lower hinges. Tightening torque: 23 Nm |
| – | Raise the door and remove it from the hinge corners. |
| Installation |
| Installation is performed in the reverse order. |
