seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Preparation of the new side window for glazing > < Preparing the non-deteriorated glass for installation

Leon Mk2

Preparing new glass for installation
Preparing new glass for installation
   
New windows are provided with a -PUR- lip. This pre-applied glue is composed for the positions 1, 2 and 3
1 - Hermetic lip
2 - Spacing core
3 - Application zone for sealant cord
4 - Glass
–  Wipe the pre-applied glue joint using a dry cloth, lint-free.
  WARNING
The pre-applied glue joint must not be primed or treated with cleaning solution
  V64-0312
–  Apply a thin layer of activator using the applicator -1- (felt ball with wire) on the pre-applied glue joint -2- of the glass.
–  Leave it to dry and react for at least 10 mins.
  Note
The activator must not come into contact with the paintwork; if this happens the paintwork could be damaged.
  V64-0208

Preparation of the new side window for glazing > < Preparing the non-deteriorated glass for installation