Leon Mk2
| Rear door: installation overview |
| 1 - | Door |
| q | Removing and fitting: → Chapter |
| q | Adjustment → Chapter |
| 2 - | Window glass hollow gasket |
| q | Fitted on to the flange |
| 3 - | Door glass |
| 4 - | Glass guide |
| q | Clipped on window frame |
| 5 - | Cover |
| q | Remove it from the door frame (clipped on) |
| 6 - | Bolt |
| 7 - | Cover |
| 8 - | Window guide support |
| q | One end of the window guide fits in to the support → Item |
| 9 - | Bolt |
| q | Tightening torque: 10 Nm |
| q | Loosen the support to detach from the window guide |
| 10 - | Protective side barrier |
| q | Incorporated into door |
| 11 - | Window riser |
| 12 - | Bolt |
| q | Tightening torque: 10 Nm |
| q | To remove the window riser, loosen |
| 13 - | Door cover/retainer |
| 14 - | Door retainer |
| 15 - | Bolt |
| q | Tightening torque: 7.5 Nm |
| 16 - | Bolt |
| q | Tightening torque: 6.5 Nm |
| 17 - | Cover for door retainer |
| q | Self-adhesive, attached to strut B |
| 18 - | Seal for small window opening |
| q | Fitted on to the flange |
| 19 - | Prisoner bolt |
| q | Tightening torque: 23 Nm |
| 20 - | Door hinge |
| q | Bolted to door and to strut B (the hinge bolt fits into the plate and is secured with a set screw) |
| 21 - | Bolt |
| q | Tightening torque: 36 Nm |
