Leon Mk2
| Central console: removing and installing. |
| 1 - | Central console |
| q | Removing: |
| – | Remove the cover → Item and lift upwards |
| – | Open ashtray |
| – | Remove the cover → Item and lift upwards |
| – | Remove the hexagonal bolts → Item |
| – | Open the cover of the Philips screws -5 |
| – | Remove Philips screw → Item |
| – | Detach the extension of the central console → Item from the central console and lift upwards |
| – | Lift the console at the back, by the threaded bolts -9- and lift off the support -11- towards the back |
| – | Remove the central console upwards and over the gearstick |
| t | Installation: |
| – | Place the spacing sockets -6- on the threaded bolts -9- |
| – | Install in reverse order. At the same time determine the correct position of the damping -7- |
| 2 - | Cover |
| q | Clipped |
| 3 - | Hexagonal bolt |
| q | 2 Nm |
| 4 - | Central console |
| 5 - | Star head bolt |
| q | 1.5 Nm |
| 6 - | Spacing sockets |
| 7 - | Sound damping |
| 8 - | Ratchet bolt |
| 9 - | Threaded bolt |
| 10 - | Cover |
| q | Clipped |
| 11 - | Support |