seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Checking seat belts > < Side impact airbag sensor for driver/passenger, removal

Leon Mk2

Side impact airbag sensor for driver/passenger, assembly
Side impact airbag sensor for driver/passenger, assembly
Installation is carried out in reverse order. The following should be taken into account:
–  Switch off all electric appliances.
–  Switch ignition on.
–  Close the doors.
–  Connect battery earth cable.
  WARNING
On connecting the battery earth cable, ensure that there is no-one inside the vehicle .
  Note
t  On reconnecting battery, remember to activate vehicle equipment (radio/radio navigation system, clock, electric window risers) in line with → Instruction Manual.
   
t  If after assembly, the Airbag warning lamp -K75- lights up, the fault memory must be erased using the central diagnosis -VAS 5051- or the central diagnosis -VAS 5052-. After erasing the memory, consult the fault memory again → Vehicle diagnosis, testing and information system VAS 5051.
  E69-10017

Checking seat belts > < Side impact airbag sensor for driver/passenger, removal