| Safety regulations for belt tensioner |
| t
| Testing, assembly and repair work should only be carried out by personnel specialised in this field |
| t
| The components of the belt tensioner can not be opened or repaired. As a general rule, new parts should be used. |
| t
| Tensioner units which drop on the ground must not be fitted in the vehicle. |
| t
| Tensioner units which are physically damaged (cracks, dents), must, as a rule, be replaced. |
| t
| Seat belt tensioners that have been triggered should be disposed of as scrap |
| t
| The tensioner units should be fitted as soon as they are removed from their packing box |
| t
| If work has to be stopped, the tensioner unit should be replaced in its box again |
| t
| The belt tensioner unit should not be left unsupervised |
| t
| The tensioner unit should not be treated with grease, cleaning products or similar, nor should it be exposed to temperatures over 100°C |
|
|
|
