Leon Mk2
Boot side lining: removing and fitting |
Removing |
– | Removing the rear side lining → Chapter |
– | Removing the rear lock carrier plate cover → Chapter |
– | Unscrew bolts -arrows-. |
– | Unclip boot side lining -1-, separating it from the rear shelf compartment -2- |
– | Unclip the hood -3-, remove the adjustable bolt -4- and remove the pillar loop -5- and spacing ring -6- |
– | Unclip the side panel shelf compartment → Chapter |
– | Extract bolt -3- and remove the belt end bracket-4- |
– | Pass the belt webbing through the boot side lining and remove the lining |
Installation |
Installation is carried out in reverse order. The following should be taken into account: |
Note
The clips should be replaced after removal |