Leon Mk2
| Moulded ceiling with sliding sunroof/deflector: removing and fitting |
| General assembly overview |
| 1 - | Cover with interior light |
| 2 - | Connector |
| 3 - | Bolt |
| 4 - | Chassis |
| 5 - | Moulded ceiling |
| Removing |
WARNING
|
| – | Remove the sunshades |
| – | Remove the roof handgrips. |
| – | Undo the cover with the interior light → Item |
| – | Remove the connector → Item |
| – | Extract the bolts → Item . |
Note| The frame → Item is fixed to the moulded ceiling → Item with staples. To remove the frame the sliding sunroof must be opened to the maximum |
| – | Lower the central sunshade -1- where there is one |
| – | Take out the plate bolt -2- from the roof spar -3- and remove the sunshade |
| – | Lower the front part of the moulded ceiling -4- and move it backwards, until the guide tabs -5- come out of the roof crossbeam -6-. Pull the moulded ceiling forwards to detach it from the roof crossbeam |
| – | Lower the moulded ceiling -4- with the help of a second worker (danger of breakage) and remove from the vehicle |
| Installation |
| Installation is carried out in reverse order. The following should be taken into account: |
Note| After reconnecting the battery check the vehicle equipment (radio, clock, electric windows), as shown in the Repair Manual and/or the Owners' Manual. |
