Leon Mk2
Servicing valve gear
Servicing valve gear
|
|
|
→ Fig. 1 Camshafts, checking axial clearance Wear limit: max. 0.15 mm Check with bucket tappets removed and with first and last bearing caps fitted to appropriate camshaft. |
→ Fig. 2 Fitting position of camshaft bearing caps The bearing cap identification must be readable from the exhaust side of the cylinder had and the arrow pointing to vibration damper end. |
→ Fig. 3 Valve dimensions Note: Valves must not be reworked. Only lapping-in is permitted.
|