SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Servicing injection pump >
< Rules for cleanliness
Leon Mk2
Engine, mixture preparation
Diesel direct injection and glow plug system
Fuel preparation system Diesel injection / Servicing diesel direct injection system
Fitting locations overview
Diesel direct injection and glow plug system
Servicing Diesel direct injection system
Fitting locations overview
Air mass meter (G70)
Heater pipe
◆
Resistance between contacts:
4...17 ω
(at ambient temperature)
◆
Voltage supply via terminal 15
Injector with needle lift sender (G80)
Exhaust gas recirculation valve (N18)
Clutch pedal switch (F36)
Brake pedal switch (F47)
Brake light switch (F)
Accelerator pedal position sender (G79)
Diesel direct injection system control unit (J248)
◆
Location: behind dash panel insert in passenger compartment
◆
With sender for intake manifold pressure (G71)
◆
With elevation sender (F96)
◆
Renew
Charge pressure limiting solenoid valve (N75)
Intake manifold temperature sender (G72)
Multi-pin connector
◆
For fuel temperature sender (G81)
◆
For quantity adjuster (N146)
◆
For modulating piston movement sender (G149)
◆
For engine codes AFN, AVG additionally for fuel shut-off valve (N109) and commencement of injection valve (N108)
Coolant temperature sender (G62)
Speedometer sender (G22)
Central connector
2 pin connector
◆
For needle lift sender (G80)
3 pin connector
◆
For engine speed sender
Engine speed sender (G28)
3 pin connector
◆
Engine codes AHU, 1Z
◆
For fuel shut-off valve (N109)
◆
For commencement of injection valve (N108)
Fuel cut-off valve (N109)
Injection pump metering control
◆
With fuel temperature sender
◆
With quantity adjuster (N146)
◆
With modulating piston movement sender (G149)
Engine, mixture preparation
Diesel direct injection and glow plug system
Fuel preparation system Diesel injection / Servicing diesel direct injection system
Fitting locations overview
Servicing injection pump >
< Rules for cleanliness