SEAT Workshop Service and Repair Manuals

• Air cleaner upper part
• Vacuum hose
• ◆ To junction piece
  , item 8
• O ring
• ◆ Renew if damaged
• Air mass meter (G70)*
• ◆ Checking => Page 24-46
• Connector
• ◆ Black, 4 pin
• ◆ For air mass meter (G70)
• Intake hose
• ◆ Ensure seated tightly

• Connector
• ◆ Black, 2-pin
• ◆ For heater element (N79)
• ◆ Check heater element voltage supply between contacts 1 and 2 with ignition switched on:
      Specification:
      At least 11.5 V
• Heater element (N79)
• ◆ For crankcase breather
• ◆ Arrow on heater element points to intake hose
• ◆ Resistance at ambient temperature (approx. 25 °C)
      Specification: 7...12 ω
• Connecting hose
• Crankcase breather valve
• ◆ Arrow on crankcase breather valve points to intake hose

• Vent hose
• ◆ From activated charcoal filter:

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

• Retaining ring
• ◆ For solenoid valve 1
• Activated charcoal filter solenoid valve 1 (N80)*/**
• ◆ Arrow on solenoid valve points in direction of flow
• ◆ Activated charcoal filter system:

=> Repair group 20; removing and installing parts of the fuel supply system; servicing activated charcoal filter system

• Connector
• ◆ Green, 2-pin
• ◆ For solenoid valve 1

• Breather hose
• ◆ => Page 24-19, item 7
• ◆ Breather hose must not come into contact with other components
• Rubber bush
• Filter element
• Air cleaner lower part
• Intake hose
• ◆ Ensure seated tightly
• ◆ To secondary air pump motor (V101):

=> Repair group 26; Secondary air system; Removing and installing parts of secondary air system