seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Haldex clutch oil level: filling > < Haldex clutch oil level: check and add oil

Leon Mk2

Haldex clutch oil level: checking
Haldex clutch oil level: checking
Prior condition:
l  The final group should be in its original installation position.
–  Connect the central diagnosis -VAS 5051B- or the central diagnosis -VAS 5052-.
–  Select the following options on the screen, in this order:
–  Select “Guided functions”.
–  Select “22 - Total traction with Haldex clutch”.
–  Select “Measured values reading”.
–  When the oil temperature displayed for the Haldex clutch is between 20 and 40°C:
–  Place the drip tray -VAS 6208- under the Haldex clutch.
   
–  Unscrew the oil level control screw -arrow- (for the purposes of clarity, the figure is shown with the final group removed).
The oil level is correct if the oil level in the Haldex clutch reaches the lower edge of the control hole.
–  Screw in the bolt -arrow-with a new seal and tighten it to a torque of 15 Nm.
  N39-10175

Haldex clutch oil level: filling > < Haldex clutch oil level: check and add oil