| l
| The adjusting unit for heating must be fitted. |
| l
| The joining part → Anchor must be removed. |
| –
| Turn the temperature control fully to the left. |
| –
| Fit the end of the drive cable -1- to the lever of the temperature flap -2-. |
| –
| Press the lever of the temperature flap to the limit -arrow A- and fix the drive cable sleeve -1- in the clip -3-. |
| –
| Turn the temperature control to the right and left limits. |
| When turning the control, it is necessary to reach the respective limits. |
|
|
|
