Leon Mk2
| Support for air conditioning compressor: removing and refitting, distinctive engine lettering AGP, AGR, ALH |
| t | Dynamometric spanners -SAT 8010- |
Note!| The compressor support and parts can be removed and refitted without having to open the cooling agent circuit. |
| 1 - | Support for the injection pump, the alternator, compressor and the fin pump for the power steering |
| q | Removal: |
| – | Previously remove the injection pump, the alternator, the compressor and the fin pump for the power steering → Electrical system; Rep. Gr.27 → Running gear; Rep. Gr.48 |
| → Direct injection system and diesel preheating; Rep. Gr.23 |
| – | Withdraw the compressor from the support and fix it to the body with a suitable tool (welding wire, for instance) |
| – | Unscrew the support for the compressor from the engine block. |
| 2 - | Injection pump |
| q | Removal: → Direct injection system and diesel preheating; Rep. Gr.23 |
| 3 - | Fin pump for power steering |
| q | Removal: → Running gear; Rep. Gr.48 |
| 4 - | Hexagonal bolt with collar |
| q | M10X65 |
| q | 45 Nm |
| 5 - | Hexagonal bolt with collar |
| q | M10X45 |
| q | 45 Nm |
| 6 - | Compressor |
| q | With magnetic coupling -N25- |
| q | Magnetic coupling -N25-: repair → Item |
| 7 - | Hexagonal bolt with collar |
| q | M10X112 |
| q | 45 Nm |
| q | 2 units |
| 8 - | Re-sending roller |
| q | Removing and refitting → Item |
| 9 - | Alternator |
| q | Removal: → Electrical system; Rep. Gr.27 |
| 10 - | Poly-V belt |
| q | Removal: → Item |
| q | Poly-V belt run → Item |
