Leon Mk2
Note!
|
| 1 - | Air conditioning with evaporator |
| q | This may only be removed when the refrigerant circuit is empty; bring the vehicle to a support workshop specialised in air conditioning work |
| q | Air conditioning: removing and installing → Chapter |
| q | Air conditioning: dismantling and assembling → Chapter |
| 2 - | Servomotor for the de-icing flap (00710) -V107- |
| q | With the Potentiometer on the de-icing flap servomotor (00727) -G135- |
| q | Lever colour code: blue |
| q | Removing and installing → Chapter |
| 3 - | Air temperature sender, left foot well zone vent C1157 -G261- |
| q | Removing and installing → Chapter |
| 4 - | Servomotor for the centre flap (01272-4123) -V70- |
| q | With the Potentiometer - servomotor centre flap (00601) -G112- |
| q | Removing and installing → Chapter |
| 5 - | Additional heating element (00402) -Z35- with Additional air heating control unit (00483) -J604- |
| q | Vehicles with diesel engine only |
| q | Operation test → Vehicle diagnosis, testing and information system VAS 5051 |
| q | Removing and installing → Chapter |
| 6 - | Heating heat exchanger |
| q | Removing and installing → Chapter |
| 7 - | Servomotor for the left hand side temperature flap. (01809) -V158- |
| q | With Servomotor potentiometer for the left hand side temperature flap. (01841) -G220- |
| q | Lever colour code: white |
| q | Removing and installing → Chapter |
| 8 - | Servomotor for the air retention flap (01274-4131) -V71- |
| q | With the Potentiometer - servomotor for air retention flap (00604) -G113- |
| q | Removing and installing → Chapter |
| 9 - | Servomotor for air recirculation flap (00716) -V113- |
| q | With the Potentiometer on the air recirculation flap servomotor (00735) -G143- |
| q | Removing and installing → Chapter |
| 10 - | Air temperature sender, right foot well zone vent -G262- |
| q | Removing and installing → Chapter |
| 11 - | Air inlet opening with air recirculation / air retention (fresh air) flap |
| q | Removing and installing → Chapter |
| 12 - | Temperature sender - fresh air intake duct (00787-3213) -G89- |
| q | Removing and installing → Chapter |
| 13 - | Fresh air turbine control unit -J126- and Fresh air turbine (01273-4124) -V2- |
| q | Removing and installing → Chapter |
| q | The Fresh air turbine control unit -J126- is fitted on the Fresh air turbine (01273-4124) -V2- and cannot be replaced separately |
| q | Checking → Vehicle diagnosis, testing and information system VAS 5051 |
| 14 - | Dust and pollen filter |
| q | Removing and installing → Chapter |
| q | Note the replacement intervals → Booklet1 |
| 15 - | Air temperature sender, evaporator output (00818) -G263- |
| q | Removing and installing → Chapter |
| 16 - | Servomotor for the right hand side temperature flap. (01810) -V159- |
| q | With Child seat occupation sensor, passenger side (01580) -G211- |
| q | Removing and installing → Chapter |
| 17 - | Refrigerant agent tubes to the heat exchanger |
| 18 - | Grommet |
| q | To make airtight the passage for the refrigerant tubes and cooling agent in the transverse panel to the engine compartment |
| 19 - | Connection for condensation drain |
| q | Check the condensation drainage, remove and fit the condensation drainage flexible tube → Chapter |
| 20 - | Expansion valve |
| q | Removing and refitting the refrigerant tubes → Chapter |
| q | Removing and installing → Chapter |
