seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Heating control unit J65 : removing and installing > < Activation of the seat heating (optional equipment)
Activation of the additional air heating (for diesel vehicles)
Activation of the additional air heating (for diesel vehicles)
   
t  There is a switch fitted in the Heating control unit -J65-. The switch is activated (closed) by means of the rotating control for temperature preselection -A- in the range from the position of approx. 3 hours to maximum “heat”.
  E80-10010
–  If the additional heat switch is closed, the electronics in the Heating control unit -J65-, with the ignition turned on, switches through contact “7” earth to the Additional air heating control unit (00483) -J604-. The Additional air heating control unit (00483) -J604- detects that additional heating potential is required and activates the electric additional heater, if in addition the other conditions for activation in the Additional air heating control unit (00483) -J604- are complied with.
  E80-10001

Heating control unit J65 : removing and installing > < Activation of the seat heating (optional equipment)