seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Specifications: > < Continuation of test:
Checking pressures with restrictor and reservoir (with internally regulated compressor)
Checking pressures with restrictor and reservoir (with internally regulated compressor)
  Note
t  Connect AC service station.
t  Observe test requirements → Chapter.
–  Let the engine run at a speed of 2000 rpm.
–  Observe pressure reading (e.g. pressure gauge) of air conditioner service station.
  Note
t  The switching pressures of the refrigerant circuit switches are specific to the vehicle.
t  The valve connection for the low-pressure switch or the evaporator must only be used on vehicles with no service connection on the low-pressure side and with a non-accessible connection on the compressor or collecting tank (measurement precission). Applies only for certain vehicles → heater and air conditioning; Rep. gr.87 or → air conditioning; Rep. gr..
   

Specifications: > < Continuation of test: