seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Suction and charging valve, low pressure side > < Suction and charging valve with Schrader valve
Suction and charging valve, high pressure side
   
Suction and charging valve, high pressure side
  Note
t  Torque wrench -V.A.G 1783- with "insertable ratchet 1/4 Inch" -VAS 6234-
t  Socket -T10364- for releasing the valve element → Fig.
1 - Base with external or internal thread
2 - Oil seal: 10.8 mm; 1.8 mm Differentiation: black or coloured
3 - Suction and charging valve with groove for O-ring, and exterior or interior thread M8 x 1 for cap
4 - O-ring for cap: 10.8 mm; 1.8 mm Differentiation: black or coloured
5 - Cap
  V87-1435

Suction and charging valve, low pressure side > < Suction and charging valve with Schrader valve