seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servomotor for the defrosting flapV107, potentiometer for defrosting flap servomotorG135 and temperature flap servomotorV68, pot > < Vent temperature sender, centre vent G191 removing and installing

Leon Mk2

Removing and installing footwell vent temperature sender G192
Removing and installing footwell vent temperature sender -G192-
Detaching
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove the radio or radio / navigation system → Radio, telephone, navigation; Rep. gr.91.
   
–  Put your hand through the hole for the radio and remove the connector -A-.
–  Turn the air outlet temperature sender -B- 90° in the direction of the arrow.
  Note
Move the wiring harness away from the vehicle, if necessary.
–  Remove the outlet air temperature sender from its housing in the air conditioning.
Installing
Install in the reverse order to removal.
  E87-0138

Servomotor for the defrosting flapV107, potentiometer for defrosting flap servomotorG135 and temperature flap servomotorV68, pot > < Vent temperature sender, centre vent G191 removing and installing