seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Control and display unit > < Engine codes AJH, ATM and AWC

Leon Mk2

Engine codes ANU, AJM, ASZ, AUY, BRT, BTB, BVH and BVK
Engine codes ANU, AJM, ASZ, AUY, BRT, BTB, BVH and BVK
  Note
t  The ancillary bracket for air conditioner compressor can be removed and installed without the refrigerant circuit being opened.
t  Take the vehicle to a suitable workshop with specially trained mechanics if the air conditioner compressor must be removed.
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
  W00-0427
1 - Dowel sleeve
2 - Ancillary bracket for alternator, air conditioner compressor and power steering vane pump
q   Part No. 045 903 143 C
q   To remove:
–  Remove alternator → Rep. Gr.27.
–  Remove power steering vane pump → Rep. Gr.48.
–  Remove air conditioner compressor -10- from ancillary bracket.
q   Installing:
–  Renew securing bolts.
–  Observe securing bolts tightening sequence. First tighten socket head flange bolt -6-, then socket head flange bolt -5-, then socket head flange bolts -8-, -7-, -4- and -3-.
3 - Socket head flange bolt M10×45
q   45 Nm
4 - Socket head flange bolt M10×45
q   45 Nm
5 - Socket head flange bolt M10×45
q   45 Nm
6 - Socket head flange bolt M10×45
q   45 Nm
7 - Socket head flange bolt M10×45
q   45 Nm
8 - Socket head flange bolt M10×45
q   45 Nm
9 - Refrigerant hoses
q   Bolts 22 Nm
10 - Air conditioner compressor
q   Remove air conditioner compressor → Chapter.
q   Remove from ancillary bracket
–  Remove front bumper → Rep. Gr.63.
–  Separate lock carrier and pull it forwards.
–  Remove headlight housing → Rep. Gr.94.
–  Remove poly V-belt -11-.
–  Remove alternator → Rep. Gr.27.
Running-in procedures → Chapter.
11 - Poly V-belt
q   Removing and installing → Rep. Gr.13.
q   Poly V-belt routing → Fig..
12 - Hexagon bolt M10×112
q   45 Nm
q   Qty. 2
13 - Bush

   
Poly V-belt routing
  Note
When installing poly V-belt, ensure that it is correctly seated on poly V-belt pulley.
  N87-0621

Control and display unit > < Engine codes AJH, ATM and AWC