seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Air outlet vent: Removing and installing. > < Removing and installing heater unit

Leon Mk2

Checking ventilation frame
Checking ventilation frame
   
–  Check that air ducts to both ventilation frames -A- in luggage compartment (left-side and right-side) are not blocked.
t  The seal edges -B- in the air outlet vent -A- should be free to move and close alone.
t  Plugged air outlet ducts or stuck seal edges may cause the windows of the vehicle to fog up.
  Note
t  In the diagram, the air outlet vent is shown with the rear bumper moulding removed.
t  For the forced air system, 2 air outlets have been fitted -A-.
t  So that the seal edges -B- close correctly, the air outlet vent -A- must be fitted with the rayons -C- facing downwards.
  E87-10009
t  To ensure proper operation of passenger compartment ventilation, vent openings left -A-, right -B- and at the rear -C- in luggage compartment lining are never to be sealed off.
  E87-10010

Air outlet vent: Removing and installing. > < Removing and installing heater unit