–
| Drain the refrigerant circuit. |
–
| Remove refrigerant pipes from the expansion valve → Fig.. |
–
| Unscrew the bolts -4-, torque: 5 Nm- |
–
| Replace the expansion valve -3-. |
Note t
| Close the open connection in the evaporator. |
t
| Replace the O-rings -2- (11.10 mm; 1.78 mm) and -5- (17.17 mm; 1.78 mm), moisten with refrigerant oil and place them in the refrigerant pipes of the evaporator. |
t
| The expansion valve must be correctly placed on the heat-proof insulation -1-. |
|
|
|