seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing fresh air and air recirculation flap servomotorV154 (Servomotor for air recirculation flapV113)

Leon Mk2

Removal:
Removal:
–  Turn the ignition on and wait until the servo motor is in its final position „fresh air option“.
–  Switch ignition OFF.
–  Remove the glove compartment: → Bodywork, interior installation work; Rep. gr.68.
   
–  Release the inserts -B- and -C- for the support -A- in the air inlet opening and then remove the support -A-.
  A80-0253
–  Remove the servo motor -B- (in the direction of the arrow) from the air inlet opening.
  Note
t  The connection between the cogwheels of the servomotor and the dynamic pressure flap is designed is such a way that the servomotor may only be easily removed in the position „fresh air option“ (the opening for the air recirculation inlet option by the fresh air / air recirculation flap -A- is closed).
t  If the servo motor is in any other position and cannot be moved, it may not be extracted without first loosening the allotment points -C-, ensure to avoid any damage to the cogwheel -D- during this operation.
  A80-0252

Installing > < Removing and installing fresh air and air recirculation flap servomotorV154 (Servomotor for air recirculation flapV113)