seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fresh-air turbine V2 : removing and fitting > < Heating components: removing and fitting

Leon Mk2

Additional resistance for the fresh air turbine with overheat fuseN24: removing and fitting
Additional resistance for the fresh air turbine with overheat fuse -N24-: removing and fitting
–  Remove the glove compartment → Bodywork, interior fitting work; Rep. Gr.68.
–  Remove the passenger side foot well cover → Bodywork, interior fitting work; Rep. Gr.68.
   
–  Disconnect the connector -A- from the additional resistance -B-.
–  Release the block -C- and move the additional resistance -B- towards the right -arrow-.
  WARNING
The refrigerator body of the series resistance of the exterior air fan with overheating fuse -N24- may get very hot.
–  Extract the additional resistance -B- from the heating system.
  A80-0237

Fresh-air turbine V2 : removing and fitting > < Heating components: removing and fitting