seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servomotor for outer air/air recirculation flap V154 ( Servomotor for air recirculation flap V113 ): removing and fitting|Fitting > < Servomotor for outer air/air recirculation flap V154 ( Servomotor for air recirculation flap V113 ): removing and fitting

Leon Mk2

Removing
Removing
–  Turn the ignition on and wait until the servomotor is in its final position “fresh air option”.
–  Switch ignition OFF.
–  Remove the glove compartment: → Bodywork - Interior fitting work; Rep. Gr.68
   
–  Release the tabs -B- and -C- for the support -A- in the air inlet opening and then remove the support -A-.
  A80-0253
–  Remove the servomotor -B- (in the direction of the arrow) from the air inlet opening.
  Note
t  The join between the cogwheels of the servomotor and the dynamic pressure flap is designed is such a way that the servomotor may only be easily removed in the position “fresh air option” (the opening for the air recirculation inlet option by the fresh air / air recirculation flap -A- is closed).
t  If the servomotor is in any other position and cannot be moved, it may not be extracted without first using force to release the allotment points -C-, take care to avoid any damage to the cogwheel -D- during this operation.
  A80-0252

Servomotor for outer air/air recirculation flap V154 ( Servomotor for air recirculation flap V113 ): removing and fitting|Fitting > < Servomotor for outer air/air recirculation flap V154 ( Servomotor for air recirculation flap V113 ): removing and fitting