seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Main board for the heating control: removing and fitting

Leon Mk2

Removal:
Removal:
   
–  Fit the rotating control for temperature selection -A- in the position „cold limit“.
–  Remove the glove compartment → Bodywork, interior fitting work; Rep. gr.68.
–  Remove the vent from the foot well area on the passenger side.
–  Replace the Heating control unit -J65- → Chapter.
  E80-10010
–  Release the flexible axle insert -H-
–  Release the insert -D- for the Bowden cable sheath -E- and remove the Bowden cable sheath from the allotment.
  E80-10008
–  Release the ball on the Bowden cable -F- from the operation lever -G-.
–  Remove the main board from the centre console.
  E80-10008

Installing > < Main board for the heating control: removing and fitting