SEAT Workshop Service and Repair Manuals > Leon Mk2 > Heating, ventilation, air conditioning system | Heating and air conditioning | Heating | Supplementary heating element Z35 : checking | Removing and assembling the heating control

Removing

–	Remove the central dial from the instrument panel -6-. → Bodywork, interior fitting work; Rep. Gr.70 → Radio, telephone, navigation; Rep. Gr.91

Torque for the screws -7-: 1 Nm

The dial -6- is fitted in the upper part with the hazard warning lights and the cup holder.

–	Remove the bolts -1- and -2 holding the dial onto the inside of the instrument panel.

–	Remove the connector -3-.

–	Remove the flexible axle -4- for the air distributor flap control unit and the flexible axle -2- for the temperature flap control unit.

–	Press the four mitre joints -arrows- and pull towards the vehicle interior.

SEAT Workshop Service and Repair Manuals