seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing rear air distribution flap control motorV427 with potentiometer for rear air distribution flap control m > < Components for control and regulation of Climatronic with 2-zone temperature regulation in rear (2nd heater and air conditioning
Removing and installing operating and display unit for rear air conditioning systemE265
Removing and installing operating and display unit for rear air conditioning system -E265-
Removing
–  Remove rear centre console trim panel → General body repair, interior; Rep. gr.68.
–  Separate connector -3-.
–  Press locking lugs -arrows-downwards slightly.
   
–  Pull lower part of operating and display unit for rear air conditioning system -E265--1- out forwards. Then unclip upper part out of centre console trim -2-.
Installing
–  Install operating and display unit for rear air conditioning system -E265- in reverse order of removal. Ensure locking devices are seated correctly.
  N87-10789

Removing and installing rear air distribution flap control motorV427 with potentiometer for rear air distribution flap control m > < Components for control and regulation of Climatronic with 2-zone temperature regulation in rear (2nd heater and air conditioning