seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing left temperature flap control motorV158 with potentiometer for left temperature flap control motorG220 > < Overview of control motors on heater and air conditioning unit
Removing and installing defroster flap control motorV107 with potentiometer for defroster flap control motorG135
Removing and installing defroster flap control motor -V107- with potentiometer for defroster flap control motor -G135-
Removing
–  Remove dash panel → General body repair, interior; Rep. gr.70.
–  Remove footwell vent on driver side.
–  Remove lower bracket of heater and air conditioning unit → General body repair, interior; Rep. gr.70.
–  Mark connector of defroster flap control motor -V107--A- and disconnect.
   
–  Remove bolts -1- from defroster flap control motor -V107--A-.
–  Release control motor lever from connecting rod and remove control motor.
Installing
–  Install defroster flap control motor -V107- in reverse order of removal.
  N87-10786

Removing and installing left temperature flap control motorV158 with potentiometer for left temperature flap control motorG220 > < Overview of control motors on heater and air conditioning unit