SEAT Workshop Service and Repair Manuals > Leon Mk2 > Heating, ventilation, air conditioning system | Heating, ventilation and air conditioning | Air conditioner | Components for controlling and regulating Climatronic | Removing and installing left footwell vent temperature senderG261

Removing and installing left footwell vent temperature senderG261

Removing and installing left footwell vent temperature sender -G261-

Removing

–	Disconnect battery → Electrical system; Rep. gr.27.

–	Remove knee airbag → General body repair, interior; Rep. gr.69.

WARNING

Observe the general safety regulations when working on the airbag, belt tensioner and battery isolator units (pyrotechnical components) → General body repair, interior; Rep. gr.69.

–	Remove footwell trim panel on driver side → General body repair, interior; Rep. gr.70.

–	Remove footwell vent on driver side.

–	Disconnect connector -2- from left footwell vent temperature sender -G261--1-.

–	Turn left footwell vent temperature sender -G261--1- 90° in -direction of arrow- and remove it.

Installing

–	Install left footwell vent temperature sender -G261- in reverse order of removal.

SEAT Workshop Service and Repair Manuals